Are you a Dealer? Click Here
Hover Over an Option
To get a detailed description of each category and it's available options, to help you make the correct selection.
ADAS Solutions
iBEAM Advanced Driver Assistance Systems technologies designed to automate, adapt and enhance vehicle systems to reduce human error to improve safety.
Cameras
Improve your outlook on driving with iBEAM cameras that have you covered for every angle.
Multi-Camera Add-On Interfaces
Stay aware of your surroundings and improve safety by adding iBEAM cameras to your existing factory screen.
Mirrors + Monitors + Dashcams
Easy-to install, low-profile, mirrors, monitors and dashcams make ADAS possible.
Vehicle Specific Kits
Use the iBEAM Fit Guide to look up backup cameras and side view cameras configured and designed for your vehicle make and model.
Commercial Heavy Duty
Specialty ADAS technologies including wireless systems, monitors and high definition cameras and DVRs designed specifically for the commercial driver in mind.
Accessories
Cables, mounts, SD cards, switchers and other accessories for installation, operation and support of your iBEAM ADAS technologies.

Installation Tips

Installation & Tech Tips

Commercial Camera extensions should not exceed 100 feet. If experiencing signal loss with a standard definition cable (TE-CEX), upgrade to a high definition cable (TE-HEX). The TE-HEX cables have a thicker copper cabling that helps with the signal loss and allows for the distribution of high definition signal.

If after a camera is installed you experience a “rolling line”, check your ground. The most common cause of this would be the grounding of the camera itself. The second cause would be a loose or broken ground in the RCA itself; this would require a replacement of the camera.

If after a camera is installed you experience a black and white image, check your ground. Check the ground on the monitor and the camera. A bad ground will not allow the processor to turn on fully, which results in a black and white image.

If you are not getting an image after the install of a TE-HPC commercial camera, check and make sure the extension being used is a TE-HEX cable. The TE-HPC cameras are high definition and are required to be used with the high-definition cable. The same would apply for the monitor as well. The TE-HPC cameras MUST be used with the TE-4HCM-S monitor.