Are you a Dealer? Click Here
Hover Over an Option
To get a detailed description of each category and it's available options, to help you make the correct selection.
ADAS Solutions
iBEAM Advanced Driver Assistance Systems technologies designed to automate, adapt and enhance vehicle systems to reduce human error to improve safety.
Improve your outlook on driving with iBEAM cameras that have you covered for every angle.
Multi-Camera Add-On Interfaces
Stay aware of your surroundings and improve safety by adding iBEAM cameras to your existing factory screen.
Mirrors + Monitors + Dashcams
Easy-to install, low-profile, mirrors, monitors and dashcams make ADAS possible.
Vehicle Specific Kits
Use the iBEAM Fit Guide to look up backup cameras and side view cameras configured and designed for your vehicle make and model.
Commercial Heavy Duty
Specialty ADAS technologies including wireless systems, monitors and high definition cameras and DVRs designed specifically for the commercial driver in mind.
Cables, mounts, SD cards, switchers and other accessories for installation, operation and support of your iBEAM ADAS technologies.
Back to news

iBEAMĀ® Introduces 360-Degree Interior View Camera Kits and Cargo Camera for Ford at the 2019 SEMA Show

Oct 8, 2019

Holly Hill, FL Metra Electronics®, the leading manufacturer of aftermarket 12volt installation solutions, will introduce new automotive cameras from iBEAM® at the 2019 SEMA Show. As more drivers see the value in upgrading their vehicles to reduce blind spots, prevent a collision, and in the event of an accident, protect themselves from liability with recorded footage, installers have an opportunity to provide quality aftermarket solutions from iBEAM that rival high-end OEM options.


Universal 360-Degree Interior View Cameras

iBEAM will introduce two new camera systems that record everything going on while driving - both inside and out. The difference between the kits is that one displays video on a replacement rearview mirror monitor and the other has a built-in DVR and displays video on an LCD monitor that mounts to the dash or windshield.

The TE-360M45 replacement rearview mirror with a built-in 360-degree dash camera mounts onto the windshield to simultaneously record the driver's view of the front of the vehicle and the interior of the vehicle. The TE-DVR360 dash camera and touchscreen LCD monitor is mounted onto the windshield for a complete 360-degree view from the driver's perspective, including the interior of the vehicle. Both systems allow the user to pan left or right on the touchscreen for a wider field of view and also offer a split or quad-screen view. The camera kits also include a rearview camera that mounts outside on the back of the vehicle for a 130-degree diagonal field of view when in reverse. Both cameras have an interior audio recording and snapshot capability that is ideal for rideshare or commercial drivers looking to document both the interior and exterior vehicle events with high-definition 1080p video recording. Both the TE-360M45 and the TE-DVR360 come complete with a universal mount for any car model and easy installation. The TE-360M45 comes with 480x845 resolution on a 4.5” touchscreen monitor that displays within the replacement rearview mirror, while the TE-DVR360 comes with 480x800 resolution on a 4” LCD touchscreen with a built-in DVR. 

Owners can choose to record while driving and also when they are away from their vehicle. The parking mode features are equipped with built-in collision lock G-sensors that begin to record with a shock to the vehicle when it is turned off and parked. This built-in collision lock ensures that video is recorded and files are locked in case of an accident to avoid overwriting. Footage is stored on a microSD card that can support up to 32GB of space. Storage management is automated with the loop recording feature that is continually deleting old footage in minute segments to record new footage.

            TE-360M45 Product Specifications

  • 360-degree front camera view: 1440x1440/H360 @ 24fps (includes driver’s view of the front of the vehicle and interior of vehicle)
  • Users can touch the video screen to pan from one side to the other to see a wider field of view from the front camera
  • Rear camera view: 1280x720 @ 15fps
  • Rear camera field of view: diagonal 130 degrees, horizontal 90 degrees (+ or - 5 degrees), vertical 52 degrees
  • Interior audio recording
  • LCD 4.5" touchscreen built into replacement rearview mirror
  • Maximum 32GB microSD card (class U1 or U3) (sold separately)
  • Resolution: 480x845
  • 1080p
  • Luminance: 400 nits
  • Parking mode and monitor
  • Collision lock support
  • Universal mount, if vehicle does not have a universal footprint for mirror windshield mount than it requires a TE-M06 mount (sold separately)
  • 3 year warranty


TE-DVR360 Product Specifications

  • 360-degree front camera view (includes driver’s view and interior of vehicle)
  • 130-degree rear camera included for rear of vehicle recording
  • Rear camera field of view: diagonal 130 degrees, horizontal 90 degrees (+ or - 5 degrees), vertical 52 degrees
  • Interior audio recording
  • 480x800 resolution on LCD 4" touchscreen monitor for viewing
  • 1080P
  • Luminance: 400 nits
  • Loop recording in minute segments
  • Built-in DVR with collision lock support
  • Maximum 32GB microSD card (class U1 or U3) (sold separately)
  • Parking mode feature to record while the vehicle is off
  • Voltage protection
  • Mounts to the windshield using double-sided tape (included in the kit)
  • 3 year warranty


Replacement Third Brake Light Cargo Camera for Ford®  

iBEAM is introducing a new solution to replace the factory third brake light with a rear-facing camera designed for the 2015-2019 Ford F-150, the 2019 Ranger and the 2017-2019 F-Series Super Duty models. The camera allows the driver to keep an eye on any cargo in the bed of the truck with a 170-degree rear camera view. This unobtrusive camera is complete with a black-out lens, matches the OEM style and has easy installation.


TE-FDCC1 Product Specifications

  • LED third brake light replacement  
  • Built-in camera with black-out lens 
  • Resolution: 480 TV lines 
  • Field of rear camera view: diagonal 170 degrees, horizontal 130 degrees, vertical 92 degrees
  • Min. illumination: 0 lux
  • Selectable parking lines 
  • 32 foot /10 meter extension cable included
  • 22 inch /.55 meter camera cable included
  • IP68 rated
  • Rear mounting
  • 3 year warranty


Metra Electronics® will showcase these new products from iBEAM at the SEMA Show in Las Vegas from November 5th - 8th at booth 11639 in the North Hall. iBEAM will also have its new Motion Detection Camera (TE-MDC) and Tailgate Handle Camera for Ford (TE-FDFTG) on display, which were both released earlier this year. iBEAM’s new products will also be featured in Metra’s 2019 New Product Guide, released on the opening day of the show and available for download at Additional vehicle safety solutions can be seen at


About Metra Electronics®

At Metra, 12volt installation and integration is our passion. We strive to continuously offer the highest quality products to meet the fluctuating technological challenges of the automotive world.  We actively listen to our customers’ requests and invest resources into developing the highest quality dash kit and harness solutions. We make dash kits for more vehicle applications than anyone else in the world. That’s why we’ve been known as “The Installer’s Choice” ® for more than 72 years. Our other brands include: Axxess®, T-SPEC®, The Install Bay®, Heise LED Lighting Systems®, iBEAM Vehicle Safety Systems®, Shuriken High Performance Batteries®, Raptor®, Ballistic®, AmmoTenna®, Metra PowerSports®, Saddle Tramp® and Metra Marine®. Metra’s expertise in connectivity solutions is also applied to its division of premium home theater and surveillance products, Metra Home Theater Group®.  For ordering information and pricing, visit Metra Electronics online at or call 386-257-2956.